Seat Mii 2013 Owner's Manual page 146

144 Driver assistance systems
Parking distance warning system
The 3 sensors of the parking distance warning system are situated on the
⇒ f ig.
rear bumper 89.
Switching the parking distance warning system on and off
● Switching on: With the ignition switched on, select reverse gear. A short
audible warning confirms that the parking distance warning system is
switched on and functioning.
● Switching off: release reverse gear.
Things to note on the parking distance warning system
● The parking distance warning system sometimes registers water on the
sensors as an obstacle.
● If the distance does not change, the warning signal will sound less loud-
ly after a few seconds. If the continuous signal sounds, the volume will re-
main constant.
● When the vehicle moves away from the obstacle, the beeping sound au-
tomatically switches off. On approaching the obstacle again, the beeping
sound will automatically switch back on.
● Your SEAT dealership can adjust the volume of the warning signals.
Note
A fault in the parking distance warning system is indicated through a brief
audible warning that is constant for about 3 seconds when switching on for
the first time. Check the parking distance warning system at a Specialised
workshop as soon as possible.
Optical parking system* (OPS)
Fig. 89 Parking distance
warning system sensors
on the rear bumper.
The optical parking system is an extension of the parking distance warning
system ⇒ p age 144.
On the screen of the SEAT Portable System (supplied by SEAT) the area be-
hind the vehicle is shown registered by the sensors. Any obstacles are dis-
play in relation to the vehicle ⇒
Fig. 90 On-screen OPS
display: an obstacle
A
has been detected in the
collision zone. an ob-
B
stacle has been detected
in the segment. zone
C
recorded behind the vehi-
cle.
.

