Seat Mii 2013 Owner's Manual page 207

Note
If you use tyres that are approved by SEAT, you can be sure that the true tyre
dimensions will be correct for your vehicle. For other tyre models, the tyre
vendor should provide the manufacturer's certificate with the tyre, indicat-
ing that this type of tyre is suitable for your vehicle. This certificate should
always be carried with the vehicle.
Tyre pressures
The correct tyre pressures for tyres fitted at the factory is shown on a label
and is valid for summer and winter tyres. This label
the driver door strut or inside the fuel cap.
Under-inflation or over-inflation will reduce the life of the tyres considerably
and also impair the vehicle's handling ⇒
correct tyre pressures, especially if driving at high speeds. Incorrect tyre
pressure causes premature wear and could cause tyre blow-out.
Vehicle diagram Prior to a journey...

The pressure should therefore be checked at least once a month and before
⇒ f ig. 116
is either in starting a journey.
As a general rule, the pressures given are for cold tyres. When the tyres are
hot, the pressures are greater.
. It is essential to maintain the
Never deflate a hot tyre in order to obtain the required pressure. This could
result in very low tyre pressures which may lead to sudden blow-outs.
While driving Care, cleaning and mainte-
nance
Vehicle care and maintenance
Fig. 116 Position of tyre pressure specification plate.
If and when Technical Data
205
