Seat Mii 2013 Owner's Manual page 267

How to jump start: description
Jump lead terminal connections
1. Switch off the ignition of both vehicles ⇒ .
Vehicle diagram Prior to a journey...
2. Connect one end of the red jump lead to the positive terminal
⇒ f ig. 154
tery
3. Connect the other end of the red jump lead to the positive ter-
minal
4. On vehicles with no Start-Stop system, connect one end of the
black jump lead to the negative terminal
viding assistance
Fig. 154 Diagram for
connecting jump leads if
5. On vehicles with the Start-Stop system, connect one end of the
the vehicle providing as-
sistance the current is black jump lead
not fitted with the Start-
metal part bolted to the engine block or to the engine block it-
Stop system: flat battery
self
and battery providing
A
current .
B
6. Connect the other end of the black jump lead
al component bolted to the engine block or to the engine block
itself of the vehicle with the flat battery. Do not connect it to a
point near the battery
7. Position the leads in such a way that they cannot come into
contact with any moving parts in the engine compartment.
Starting
Fig. 155 Diagram for
8. Start the engine of the vehicle with the boosting battery and let
connecting jump leads if
it run at idling speed.
the vehicle providing as-
sistance is fitted with the
Start-Stop system: flat 9. Start the engine of the vehicle with the flat battery and wait one
battery and battery
A
or two minutes until the engine is "running".
providing current .
B
Removing the jump leads
10. Before you remove the jump leads, switch off the headlights (if
they are switched on).
While driving Care, cleaning and mainte-
nance
⇒ f ig. 155
or of the vehicle with the flat bat-
+ +
.
A
in the vehicle providing assistance
+
⇒ f ig.
154.
B
to a suitable ground terminal, to a solid
X
⇒ f ig.
155.
.
A
If and when
Practical information 265
.
B
in the vehicle pro-
-
to a solid met-
X

Technical Data