Seat Mii 2013 Owner's Manual page 60

58 Ensuring you are correctly and safely seated
Warning lamp
Lights
up or
flashes



Fig. 35 Warning lamp on
the instrument panel

Several warning and control lamps light up for a few seconds when the igni-
tion is switched on while a test of the function is being carried out. They will
switch off after a few seconds.
An audible warning will be heard if the seat belts are not fastened as the
vehicle drives off and reaches a speed of more then 25 km/h (15 mph) or if
the seat belts are unfastened while the vehicle is in motion. The seat belt
warning lamp  will also flash.
The warning lamp  does not switch off until the driver and front passenger
Fig. 36 Indication of
seat belt status in the
fasten their seat belts while the ignition is switched on.
rear seats on the instru-
ment panel display.
Seat belt status display for rear seats
The seat belt status display on the instrument panel display informs the
driver, when the ignition is switched on, whether any passengers in the rear
seats have fastened their seat belts. The symbol  indicates that the pas-
senger in this seat has fastened "his or her" seat belt
Possible cause Solution
On the instrument panel: Driver's
seat belt not fastened or front pas-
Fasten seat belts!
senger seat belt not fastened if the
front passenger's seat is occupied.
Remove any objects from
On the instrument panel: Objects
the front passenger seat
on the front passenger seat.
and store them safely.
Instrument panel display: A pas-
senger in the rear seats has not
Fasten seat belts!
fastened their seat belt, if the seat
is occupied.*
Display in the instrument panel: A
passenger in the rear seats has
fastened their seat belt, if the seat
is occupied.*
⇒ f ig.
36.
