Press-Fitting Inner Cap - Hitachi CM 75EAP Service Manual

• Press-fitting inner cap (B)
2. Set Inner Cap (B) [111] in inner cap jig (A).
1. Apply two-cycle oil.
Apply to the areas.
Inner cap jig (A)
Rear Handle Set [114]
Inner Cap (B) [111]
4. Press-fit Inner Cap (B) [111] until it contacts
3. Set the Rear Handle Set [114] to prevent
inner cap jig (A) using inner cap jig (B).
inner cap jig (A) from tilting.
Inner cap jig (B)
-30-