Download Print this page

Hitachi CM 75EAP Service Manual page 11

Engine cutter
Hide thumbs

Advertisement

• Align the line of the Shield Cover [25] to ±0.5 mm from the top of the Cylinder Cover [136] when
inserting the plug cap and Shield Cover [25] into the Spark Plug Ass'y BPMR7A [142].
• Put the Cord [21] in the pawls of the Fan Guide [7] for reassembly.
• Put the high-voltage cord of the Ignition Coil Ass'y [23] in the groove of the Cylinder Cover [136] and
Fan Guide [7] for reassembly.
• Do not get any other part caught between the cord terminal and the terminal retaining rib of the Fan
Guide [7].
• For easier reassembly of the Recoil Starter [8], put the Recoil Starter [8] on its mounting position, pull
the starter handle, and then return it into position.
• Shield cover
• Shield cover mounting method
1. Put the plug cap on the Shield Cover [25]
and fold the Shield Cover [25] into two.
Plug cap
Top of the Cylinder Cover [136]
• Recoil starter
[25]
Bend here.
-10-
2. Bend and caulk five tabs of the Shield Cover [25]
by using the long-nose pliers.
[26]
3. Mount the Shield Cover Ring [26] by using
long-nose pliers.
[25]
Align the line of the Shield Cover [25] to ±0.5 mm
from the top of the Cylinder Cover [136].
[45]
[136]
[6]
[7]
[8]
[9]
[10]
Caulk here.

Advertisement

loading

This manual is also suitable for:

Cm 75ebp