• Firmly fit the protrusion of the inner surface of the Carburetor Insulator [149] into the groove of
the Cylinder [146] when mounting the Carburetor Insulator [149] on the Cylinder [146].
• Fit the Insulator Clip [147] into the groove of the Carburetor Insulator [149] when reassembling the
clip.
• Throttle rod and choke button
Throttle valve
Choke valve
[151]
NOTE: Orient the Choke Button [191] and
Choke Rod Rubber [192] correctly.
Apply 0.1 to 0.2 g of Alvania Grease RL3 to the sliding portions
of the Choke Button [191] and Choke Rod Rubber [192].
[191]
18±2
[192]
[135]
[134]
Fit Cleaner Box (A) [189] to the slit portion
when mounting Cleaner Box (A) [189].
-12-
[192]