Chapter 2 Osx Station Control; Displaying Osx Station Commands - Siemens SIMATIC PCS 7 OSx Operator's Manual

2.1

Displaying OSx Station Commands

2-2
OSx Station Control
With the exception of
security privileges to issue commands to an OSx station: Database Admin,
System Config, System Start/Shutdown, or Operation. To issue a command
to an OSx station, select
(Figure 2-1). Then follow the steps below.
1. Click the listing for the OSx station. The item containing the station
name highlights in reverse video.
2. Click the
Commands
(Figure 2-1).
3. Choose one of the commands from the menu.
When you execute commands from Network Setup, wait for a command to
be complete before selecting another command to execute. Otherwise, the
system may remove the highlight that identifies the station receiving the
first command.
Four commands can be issued to an OSx station:
, and
Role_Change Switch_Media
, the operator must have one of the following
Re_Sync
Startup- ->Network Setup
... button. The
Commands
. They are described in the following pages.
on the menu bar
... menu appears
,
New_Primary Re_Sync
SIMATIC PCS 7 OSx 4.1.2 Operator
,