Siemens SIMATIC PCS 7 OSx Operator's Manual page 160

Responding to Action Requests (continued)
7-8
Action Requests
The following two fields appear only when the action request is the Enter
Value type: Last Value and New Value.
Summary for an Enter Value request.
Last Value Last value of the answer attribute for the Enter Value answer
type.
New Value The new value entered for the answer attribute of the Enter
Value answer type.
BATCH_SELECT 19- -AUG 11:07:14
URGENT
User ID:
Batch ID:
Comment:
Last Value:
0
New Value:
Figure 7-3 Action Request Summary for Enter Value
Choices When the action request is the Multi-Choice type, four radio
buttons with the available choices are displayed at the lower left of the
Action Request Summary. Buttons that have no choices configured are
grayed out. Figure 7-4
Multi-Choice request.
BATCH_SELECT 19- - AUG 11:07:14
URGENT
User ID:
Batch ID:
Comment:
REAGENT_147
REAGENT_64
Figure 7-4 Action Request Summary for Multi-Choice
Figure 7-3
fmacsumm: Action Request Summary
REACTOR 27W IS FULL AND READY TO START. ENTER THE
CORRECT SOAK TEMPERATURE FOR THE BATCH BEING PRODUCED.
CONSULT THE DAILY PRODUCTION PLAN.
shows an Action Request Summary for a
fmacsumm: Action Request Summary
REACTOR 27W IS EMPTY AND AVAILABLE FOR USE. CONSULT THE
DAILY PRODUCTION PLAN TO DETERMINE WHICH REAGENT NEEDS
TO BE PRODUCED NEXT.
REAGENT_39
SIMATIC PCS 7 OSx 4.1.2 Operator
shows an Action Request
1 of
View Commit Dismiss
1 of
View Commit Dismiss
1
1