Removing A Batch - Siemens SIMATIC PCS 7 OSx Operator's Manual

Ending a Batch (continued)

Removing a Batch

8-14 Batch
After the system completes or aborts a batch, you can remove a batch from
the system. Batch removal does not have to immediately follow the ending
of a batch. To remove a batch, select the
State field. The batch is removed if all units assigned to it have been
released.
NOTE: The command does not remove the batch unless all units
Remove
associated with the batch have been released.
option in the batch detail
Remove
SIMATIC PCS 7 OSx 4.1.2 Operator