Tag_Coll; Tag-Coll:tag_Collect - Batch Interface - Siemens SIMATIC PCS 7 Function Manual

Process control system simatic batch interface blocks

Hide thumbs Also See for SIMATIC PCS 7:

Table of Contents

BATCH interface blocks

2.3 TAG_COLL

2.3

TAG_COLL

2.3.1

TAG_COLL: TAG_Collect - BATCH Interface

Object name (type + number)

FB 252 (Page 33)

Calling OBs

The OB in which you install the block (for example, OB1).

Function

The block serves as a collector block for the IEPARs that are used in transition conditions in

the BATCH recipe editor and that are not available as IEPAR in the IEPH. Process tags can

also be included as parameters that are used in the batch measured value acquisition. The

parameters of TAG_COLL are purely process values and the SP_VAL inputs are therefore

not written. Only ACT_VAL and QACT_VAL are significant.

Operating principle

Display only

SIMATIC BATCH Interface Blocks V7.1

Function Manual, 03/2009, A5E02171101-01

Table of Contents