Loading A Production Recipe; Printing A Production Recipe; Canceling A Download Request; Suspending A Recipe Download - Siemens SIMATIC PCS 7 OSx Operator's Manual

Modifying Recipe Component Values (continued)
Loading a
Production Recipe
Printing a
Production Recipe
Canceling a
Download Request
Suspending a
Recipe Download
Continuing a
Recipe Download
6-12
Recipes
To download the production recipe values after all operator entries and
modifications are made, select the
Production Recipe Preparation display.
To print the production recipe shown on the Production Recipe Preparation
display, select the
Print
To cancel a download that is currently in progress, select the
pushbutton from the Production Recipe Preparation display. The recipe
download can only be canceled on a
command is initiated during an active download, the command is not
recognized until the system evaluates a
the In_Use bit to become available.
To suspend a download, select the
Recipe Preparation display. The recipe download can only be suspended on a
block. If a hold is requested before the download has started, the
RCB_BEG
download is suspended when the next
hold is requested during an active download, the hold request is not
recognized until the system evaluates a
the In_Use bit to become available.
During a hold state, the timeout for the
time remaining until timeout is stored until a continue request cancels the
hold state.
To cancel a hold request (to continue a suspended recipe download), select
the pushbutton from the Production Recipe Preparation display.
Continue
NOTE: If the controller changes the hold status of a recipe area while the
Production Recipe Preparation dialog box is displayed, then the
buttons are not updated correctly. There is no indication on the
Continue
screen that this has happened, except that the buttons do not work as
expected.
To correct the situation, redisplay the Production Recipe Preparation screen.
This causes the and
Hold
Start Download
pushbutton.
RCB_BEG
RCB_BEG
pushbutton from the Production
Hold
RCB_BEG
RCB_BEG
RCB_BEG
buttons to display correctly.
Continue
SIMATIC PCS 7 OSx 4.1.2 Operator
pushbutton from the
Stop Request
block. If a stop request
block and is waiting for
block is encountered. If a
block and is waiting for
is also suspended. The
Hold
and