Assigning Batch Units - Siemens SIMATIC PCS 7 OSx Operator's Manual

8.5

Assigning Batch Units

8-8 Batch
To assign one or more units to a batch from the batch tag detail, follow these
steps:
1. Select
Assign Unit
area (Figure 8-6). Use the scroll bar to view multiple pages of units.
2. Select the unit(s) you want to assign to the batch. Use the scroll bar to
view multiple pages of units.
3. Select to assign the units or select
OK
Figure 8-6 Assigning Units to a Batch
. A list of unassigned units displays in the navigation
Cancel
Alarm State Sequencing:
not to assign any units.
Alarm Group:
Alarming:
State:
SIMATIC PCS 7 OSx 4.1.2 Operator