Installing The Power Supply Unit Blank - Dell PowerEdge R530 Owner's Manual

Figure 62. Removing the PSU blank
1 PSU blank
Next step
Install the PSU or PSU blank.

Installing the power supply unit blank

Install the power supply unit (PSU) blank only in the second PSU bay.
Prerequisite
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
Step
Align the power supply unit blank with the power supply unit slot and push it into the power supply unit slot until it clicks into place.
2 PSU bay
Installing and removing system components 129