Expansion Cards And Expansion Card Riser; Expansion Card Installation Guidelines - Dell PowerEdge R530 Owner's Manual

Figure 38. Installing the internal USB memory key
1 USB memory key
Next steps
1 Follow the procedure listed in the After working inside your system section.
2 While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Related link
Safety instructions
System board connectors
Before working inside your system
After working inside your system
Removing the optional expansion card riser
Removing an expansion card from the expansion card riser
Removing the cooling shroud
Installing an expansion card into the expansion card riser
Installing the optional expansion card riser
Installing the cooling shroud

Expansion cards and expansion card riser

An expansion card in the server is an add-on card that can be inserted into an expansion slot on the system board or riser card to add
enhanced functionality to the system through the expansion bus.
NOTE: A System Event Log (SEL) event is logged if an expansion card riser is unsupported or missing. It does not prevent your
system from turning on and no BIOS POST message or F1/F2 pause is displayed.

Expansion card installation guidelines

Your system supports PCI Express Generation 2 and Generation 3 expansion cards.
Use the following table as a guide for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the
highest priority must be installed first using the slot priority indicated. All other expansion cards must be installed in card priority and slot
priority order.
96 Installing and removing system components
2 USB port