Removing The Control Panel - Dell PowerEdge R530 Owner's Manual

Figure 82. Installing the control panel board
1 control panel board
3 control panel data cable
5 USB cable
Next step
1 Follow the procedure listed in the After working inside your system section.
Related link
Safety instructions
Before working inside your system
After working inside your system

Removing the control panel

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
CAUTION:
connector is released before removal and insertion. The locking tab must be engaged after insertion.
3 Keep the Phillips #2 screwdriver ready.
The display module connector is a ZIF (zero insertion force) connector. Ensure that the locking tab on the
2 screws (2)
4 LCD display module cable
Installing and removing system components 151