Inside The System - Dell PowerEdge R530 Owner's Manual

Steps
1 Align the slots on the system cover with the tabs on the chassis.
2 Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the slots on the system cover engage with the tabs on the chassis. The system cover latch locks
into place when the system cover is completely engaged with the tabs on the chassis.
3 Rotate the latch release lock clockwise to the locked position.
Figure 15. Installing the system cover
1 system cover
3 latch release lock
Next steps
1 If removed, install the front bezel.
2 Reconnect the peripherals and connect the system to the electrical outlet.
3 Turn on the system, including any attached peripherals.
Related link
Safety instructions
Before working inside your system
After working inside your system
Removing the system cover

Inside the system

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
NOTE: Components that are hot swappable are marked orange, and touch-points on the components are marked blue.
66 Installing and removing system components
2 latch