Processors And Heat Sinks - Dell PowerEdge R530 Owner's Manual

Figure 55. Installing the integrated storage controller card
1 integrated storage controller cable
3 integrated storage controller card connector on the
system board
Next steps
1 If applicable, install the PCIe expansion-card riser.
2 If applicable, connect the required power or data cables to the expansion card(s).
3 Reinstall the cooling shroud.
4 If applicable open the expansion-card latch on the cooling shroud to secure the full length expansion card.
5 Follow the procedure listed in the After working inside your system section.
Related link
Safety instructions
Before working inside your system
After working inside your system
Removing the cooling shroud
Removing the optional expansion card riser
Installing the optional expansion card riser
Installing the cooling shroud

Processors and heat sinks

Use the following procedure when:
• Removing and installing a heat sink
118 Installing and removing system components
2 integrated storage controller card
4 integrated storage controller card holder