Installing The System Cover - Dell PowerEdge R530 Owner's Manual

Steps
1 Rotate the latch release lock counter clockwise to the unlocked position.
2 Lift the latch toward the back of the system.
The system cover slides back and the tabs on the system cover disengage from the slots on the chassis.
NOTE: The position of the latch may vary depending on the configuration of your system.
3 Hold the cover on both sides, and lift the cover away from the system.
Figure 14. Opening and closing the system
1 system cover
3 latch release lock
Next steps
1 Install the system cover.
2 Follow the procedure listed in the After working inside your system section.
Related link
Safety instructions

Installing the system cover

Before working inside your system
After working inside your system
Installing the system cover
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside the system.
2 latch
Installing and removing system components 65