Responsabilities Of The Operator - ferrotec genius Mounting Instructions

Mounting instruction Genius
instruct his operating and
•
electron beam evaporator and the evaporation controller
ensure the safety precautions are being observed including the use of personal pro­
•
tective equipment.
The owner must ensure that the entry to the hazard area of the machine (into which
•
the evaporation controller has been build in) by unauthorized persons (no operating
and maintenance personal) is prevented.
This mounting instruction must be kept in a safe place for future reference. The frequency
of inspections and checks must be observed. The work described in this Mounting instruc­
tion is explained in such a way that
in the chapters on operation and modes of operation can be understood by an
•
instructed person and
those on transport, installation and assembly, maintenance and troubleshooting by a
•
skilled person.
The chapters on transport, installation and assembly, maintenance and troubleshooting are
intended for skilled persons only. Work described in these chapters may only be carried out
by such skilled persons.
Instructed person
Skilled person
Definitions based on EN 60204-1: 2006.
3.5 Responsibilities of the operator
N O T I C E !
implementation of the framework directive 89/391/EEC and
corresponding individual directives, in particular the directive 2009/104/EEC
concerning the minimum safety and health requirements for the use of work
equipment by workers at work, as amended, are to be observed and adhered to. In
Germany the Plant Safety Ordinance of October 2002 must be observed (translation of
the above-mentioned directive into national law).
The operator must obtain any local operating permits required and observe the provisions
contained therein. In addition to this he must observe local laws and regulations on
personnel safety (accident prevention regulations),
•
safety of work materials and tools (safety equipment and maintenance),
•
disposal of products (laws on wastes),
•
disposal of materials (laws on wastes),
•
cleaning (cleaning agents and disposal)
•
environmental protection.
•
In addition, the owner must note:
Version 2.0.6
maintenance personnel in the use of safeguards of the
A person familiarised with and, if applicable, trained in his or her
particular duties by a skilled person and advised of the risks of
improper conduct and about the necessary safeguards and safety
precautions.
A person with relevant technical training, know-how, experience
and knowledge of applicable standards to enable him or her to
assess the work assigned to him or her and to perceive potential
risks.
In the EEA (European Economic Area) national
15/78 Ferrotec GmbH