Omron DST1-ID12SL-1 Operation Manual page 85

Editing Parameters
Item
S Execution Mode
(DST1-XD0808SL-1
only)
IMPORTANT If the power is turned OFF in Idle Mode, the next operation will not start in
IMPORTANT Safety I/O communications cannot be used when Auto Execution is set as the
Settings
After Establishing Starts in Idle Mode after the configuration
Safety I/O Connection has been completed. Goes into RUN Mode
when safety I/O communications are started.
Auto Execution Selecting this mode and executing the fol-
lowing operations causes startup in RUN
Mode from that point onwards.
• Locking the configuration
• Turning OFF the power after changing to
Safety I/O communications are not possible
in this mode.
RUN Mode even if Auto Execution is set as the execution mode and the con-
figuration is locked. The power must be turned OFF in RUN Mode.
execution mode. To use safety I/O communications, set After Establishing
Safety I/O Connection as the execution mode.
Description
RUN Mode
Section 3-1
Default
After Estab-
lishing Safety
I/O Connec-
tion
61