Monitoring Parameters - Omron DST1-ID12SL-1 Operation Manual

Monitoring Functions
1-6-2

Monitoring Parameters

Description
Monitoring Using the Network Configurator
The I/O status of a DST1-series Safety I/O Terminal can be monitored using
the Network Configurator. If the configuration fails or if an error occurs in any
I/O, monitoring this information enables the user to determine the cause of the
error.
The user can monitor the parameters using any of the following methods:
1. Select a device and select Device – Monitor from the menu bar. Click the
Parameters Tab in the displayed window.
2. Select a device and click the Monitor Device Button on the toolbar. Click
the Parameters Tab in the displayed window.
3. Right-click a device and select Monitor from the pop-up menu. Click the
Parameters Tab in the displayed window.
Section 1-6
23