Headlight/Position Light Bulb Replacement - Triumph Bonneville Bobber 2016 Owner's Handbook Manual

Headlight/Position Light Bulb
Replacement
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulbs to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty, clean
with alcohol before reuse.
Caution
The use of non-approved headlight
bulbs may result in damage to the
headlight lens.
Use a genuine
headlight bulb as specified in the
Triumph Parts Catalog.
When possible always have replacement
headlight bulbs
authorized Triumph dealer.
cjwm
1. Headlight rim fastener
Triumph supplied
installed by an
1
To replace the headlight and/or position
light bulb:
Disconnect the battery, negative (black)
lead first.
Remove the headlight rim fastener.
Detach the headlight and rim assembly
from the headlight bowl.
While supporting
disconnect the
connector from the headlight bulb and
carefully remove the position light bulb
from the light unit.
Remove the rubber dust cover.
1
cjwl
1. Wire retainer
2. Headlight bulb
3. Position bulb location
Unhook the headlight
retainer.
The headlight bulb can now be removed.
Remove the position bulb from its bulb
holder if it needs replacing.
Installation is the reversal of removal.
Tighten the headlight rim fastener to
18 lbf in (2 Nm).
Maintenance
the light unit,
multipin electrical
2
3
bulb's wire
103