Headlight/Position Light Bulb Replacement - Triumph Bonneville T100 2018 Owner's Handbook Manual

Maintenance and Adjustment
Do not cover the headlight or lens with
any item likely to obstruct air flow to,
or prevent heat escaping from, the
headlight lens.
Covering the headlight lens during
operation with
luggage, adhesive
intended to alter
headlight beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is
not considered
defect and will not be covered under
warranty.
If the headlight must be covered
during use - such as taping of
the headlight lens required during
closed-course
headlight must be disconnected.
Headlight/Position Light Bulb
Replacement
The bulbs become hot during use.
Always allow sufficient time for the
bulbs to cool before handling.
Avoid touching the glass part of the
bulb. If the glass is touched or gets
dirty, clean with alcohol before reuse.
144
Caution
items of clothing,
tape, devices
or adjust
or non genuine
a manufacturing
conditions -
Warning
The use of non-approved headlight
bulbs may result in damage to the
headlight lens.
Use a
headlight bulb as specified in the
Triumph Parts Catalog.
Always have replacement headlight
the
bulbs installed
Triumph dealer.
1
the
1. Headlight rim screws (one of two)
To remove the headlight rim:
• Disconnect the battery, negative
(black) lead first.
• Remove the headlight rim screws.
• Detach
assembly from the headlight bowl.
Caution
genuine Triumph
by an
the headlight
supplied
authorized
and rim