Deactivation; Hill Hold Unavailable Message - Triumph Tiger 1200 XR 2017 Owner's Handbook Manual

How To Ride The Motorcycle
When all of the above conditions are
met, squeeze the front brake lever
firmly and quickly, then release. Upon
releasing the lever, the message HILL
HOLD ACTIVATED will appear in the
multifunction display.
The hill hold control system is now
active and the rear brake will be
automatically applied.
The message HILL HOLD ACTIVATED will
remain visible in
display until hill
deactivated.
The rear brake will remain applied until:
• The system detects that the rider
is attempting to move off.
• Hill hold control
deactivated by the rider.

Deactivation

The hill hold
automatically deactivate when it detects
that the rider is attempting to move off.
The system will progressively release
the rear brake to assist the rider in
moving off.
The hill hold control system can also be
manually deactivated by a second firm
squeeze of the front brake lever.
The message HILL HOLD DEACTIVATED
will be displayed
multifunction display.
158
the multifunction
hold control
is manually
control system
briefly in

Hill Hold Unavailable Message

If when attempting to activate the hill
hold control system, the message HILL
HOLD UNAVAILABLE - CHECK MANUAL is
displayed, this indicates one or more of
the following:
• The activation conditions described
on page 157 have not been met.
• There is a fault with the ABS or
engine management systems and
the ABS and/or MIL warning lights
is
are illuminated. See Warning Lights
on page 61.
The hill hold control system can be
enabled or disabled (see Bike Setup on
page 49).
will
the