Hitachi H8/3152 Hardware Manual page 125

Table A.1 Instruction Set (cont)
Mnemonic
ORC ORC #xx:8, CCR
XORC XORC #xx:8, CCR
NOP NOP
EEPMOV EEPMOV
Notes: The number of states is the number of states required for execution when the instruction
and its operands are located in on-chip memory.
(1) Set to 1 when there is a carry or borrow from bit 11; otherwise cleared to 0.
(2) If the result is zero, the previous value of the flag is retained; otherwise the flag is
cleared to 0.
(3) Set to 1 if decimal adjustment produces a carry; otherwise the value prior to the
calculation is retained.
(4) The maximum write time is 10 ms.
(5) Set to 1 when the divisor is negative; otherwise cleared to 0.
(6) Set to 1 when the divisor is zero; otherwise cleared to 0.
126
Addressing Mode/
Instruction Length
B 2
B 2
—
—
Operation
CCR∨#xx:8 → CCR
CCR⊕#xx:8 → CCR
PC ← PC+2
2
4 if R4L≠0 then
Repeat @R5 → @R6
R5+1 → R5
R6+1 → R6
R4L–1 → R4L
Until R4L=0
else next
Condition Code
I H N Z V C
2
2
— — — — — — 2
— — — — — — (4)