Voltage During Continuity/Resistance Measurement; Resetting The Instrument; Repair And Calibration - AEMC 6536 User Manual

4.2.1.3 Voltage present during a continuity or resistance mea-
surement

4.2.2 resetting the instrument

You can reset your instrument at any time. To do this:
1. Press the ▲ and
2. Turn the rotary switch to any setting other than OFF.
3. The instrument reboots.
40
Shop for Data Logging products online at:
If during a continuity or resistance
measurement the instrument detects
an external voltage in excess of
15V (AC or DC), it interrupts the
measurement and displays the screen
show to the left.
You must eliminate the voltage to
resume the measurement.
buttons simultaneously.
DataLoggerStore
www.
Megohmmeter Model 6536
1.877.766.541
.ca