Table 2.7.3 The Function Table Of External Switch Input (Digital Input) - Honeywell IPC5000 Installation Manual

Table 2.7.3 The function table of External switch input (Digital input)

External
switch
number
SW1 RUN/STOP (RUN<-> STOP)
SW2 HOLD
SW3 ADV
SW4 Trouble input 1
SW5 Trouble input 2
SW6
Channel selection
SW7
SW8
SW9
Pattern selection
SW10
SW11
SW12
[NOTE 1] Channel selection
SW6 SW7
ON ON
ON OFF
OFF ON
OFF OFF
Function
IPC5000D
Trouble input 3
[NOTE 1]
Trouble input 4
[NOTE 2]
Enabled both channel (CH1,CH2)
Enabled CH1, but disabled CH2
Enabled CH2, but disabled CH1
Disabled both channel (CH1,CH2)
IPC5000S
Description
- 23 -
Detection way
Leading edge
ON status
Leading edge
ON status
ON status
Remark
These are available IPC5000D