Metal Enclosure - Tyco iSTAR Ultra Installation And Configuration Manual

4. Re-fit the enclosure cover and secure the cover with two tamper-proof screws using the
Software House security screwdriver (Part Number: 132-183).

Metal Enclosure

Item
Weight
Height
Width
Depth
To Install the IP-ACM and Metal Enclosure:
1. Open the door of the IP-ACM metal enclosure.
2. Secure the enclosure to selected wall or support surface using holes provided in the
enclosure's base. Refer to
3. Fit and connect all customer cables. See
and wiring requirements.
4. Close and secure the metal enclosure cover.
Figure 2-1: Metal IP-ACM Enclosure
Table 2-5: IP-ACM Metal Enclosure Dimensions
~2.6lb (~1.2kg)
8.25in (209.6mm)
7.34in (186.5mm)
3.46in (87.8mm)
Table 2-1 for dimensions and hole pitch for mounting.
Table 7-2
iSTAR Ultra Installation and Configuration Guide
Dimension
for more information regarding power
Installation
2–9