Tyco iSTAR Ultra Installation And Configuration Manual page 125

3. Click Save. Saved settings do not take effect until the system is rebooted. Click Reboot for
changes to take effect.
Table 9-2: IP-ACM Configuration/Status Web Page Fields
Field/Button
Configuration
Alloc Type
IP-ACM IP Addr
IP-ACM Netmask
IP-ACM Gateway
IP-ACM DNS
iSTAR IP Addr
Save
Reboot
Status (Read-Only)
Includes the above configuration information in addition to the following:
Figure 9-5: IP-ACM Configuration/Status Web Page
Description
The type of network connection used, DHCP or Static.
The IP address of the IP-ACM.
The netmask.
The gateway address.
The IP address of the domain name server.
The IP Address of the iSTAR to which the IP-ACM is
configured.
NOTE: This field will be 0.0.0.0 if the IP-ACM is not configured
in an iSTAR.
Saves the settings, but does not apply them until you click
Reboot.
Click to apply the changes.
NOTE: If you changed the IP address, the IP address may
change after you click Reboot.
iSTAR Ultra Installation and Configuration Guide
Web Page Diagnostics
9–7