Preface; How To Use This Manual - Tyco iSTAR Ultra Installation And Configuration Manual

Preface

How to Use this Manual

Chapter/Appendix
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
x iSTAR Ultra Installation and Configuration Guide
This manual contains the following information:
Title
Introducing the iSTAR Ultra
Site Requirements
iSTAR Ultra Topology
Power and Backup
iSTAR Ultra GCM Controls and
Indicators
iSTAR Ultra ACM Controls and
Indicators
Using the iSTAR Configuration
Utility (ICU)
iSTAR Ultra Web Page
Diagnostic Utility
Maintenance and Diagnostics
(LCD diagnostics and tests)
Description
Provides basic information about iSTAR Ultra, and includes
an overview of iSTAR Ultra hardware and features.
Provides physical requirements for iSTAR Ultra
configuration.
Provides the information that you need to set up
iSTAR Ultra controllers for network communications.
Provides details of iSTAR Ultra Power and Backup.
Describes the LEDs, connectors, indicators, wiring details for
the GCM.
Describes the LEDs, connectors, indicators, wiring details for
readers, I/O modules, Aux ports, wet and dry relay outputs,
inputs, alarm inputs, and FAI for the ACM.
Provides instructions for configuring iSTAR Ultra controllers
using the iSTAR Configuration Utility (ICU).
Describes how to monitor controllers and observe controller
diagnostics.
Describes how to monitor controllers and run controller
diagnostics.