Start-Up Options - Allen-Bradley PanelView Plus 6 User Manual

Start-up Options

You can specify what action the terminal takes on startup or a reset.
This Start-up Option
Do not start FactoryTalk View ME
Station
Go to Configuration Mode
Run Current Application
When desktop access is restricted, the start-up option must be set to Run
IMPORTANT
Current Application or Go to Configuration Mode (default). Refer to
details on how to enable or disable desktop access.
Disable FactoryTalk View ME Station Software on Startup
Terminals with extended features and file viewers are typically configured to
launch the Windows desktop on startup. This means you must disable
FactoryTalk View ME Station from launching on startup.
The desktop can also be launched from FactoryTalk View ME Station
TIP
Configuration mode by pressing Exit.
Follow these steps to disable FactoryTalk View ME Station on startup so that the
desktop can launch.
1. Press Terminal Settings>Startup Options.
2. Press On Startup until 'Do not start FactoryTalk View ME Station' is
selected.
When disabling FactoryTalk View ME Station, desktop access must be set to
TIP
allow or you get a warning. Refer to
3. Press OK.
Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Performs This Action
Launches the Windows Explorer desktop on startup.
Launches FactoryTalk View ME Station Configuration
mode on startup. This is the initial, factory default setting.
Runs the FactoryTalk View ME application loaded in the
terminal on startup.
Enable Desktop Access on page
Configuration Mode Chapter 3
Typical System
Open
Closed
Closed
page 54 for
54.
51