Keypad Properties; Touch Properties - Allen-Bradley PanelView Plus 6 User Manual

Keypad Properties

Touch Properties

Use the Keypad and Keyboard dialog boxes to adjust settings for the membrane
keypad of your terminal or an attached USB keyboard. The Keyboard applet is
always present. The Keypad applet appears only if your device has a keypad. If you
attach two USB keyboards, settings are used that work with both keyboards.
Repeat Tab
The Repeat tab on the Keypad or Keyboard Properties dialog box controls the
character repeat behavior of keys on the keypad or attached keyboard.
When character repeat is enabled, you can set the repeat delay and repeat rate of
keys. Verify your settings by pressing a key in the test edit box.
Touch Properties is accessible only on devices with a touch screen. It lets you
calibrate the touch screen and set the sensitivity of touch screen taps.
Calibration
The Calibration tab lets you recalibrate the touch screen if your device is not
responding appropriately to taps. Follow the instructions in the dialog box to
recalibrate.
Double-Tap
The Double-Tap tab on the Touch Properties dialog box lets you set and test the
double-tap sensitivity of the touch screen taps.
Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Windows CE Operating System Chapter 4
95