Start-Up Messages And Codes - Allen-Bradley PanelView Plus 6 User Manual

Chapter 8 Troubleshooting

Start-up Messages and Codes

Table 80 - Start-up Messages and Codes
State Message Description
Common Start-up Messages
Boot loader attempting PC connection via USB device
Boot loader loads firmware image into RAM
Boot loader jumps to operating system
Operating system starts up
Operating system registration and initialization
Machine Edition registration and initialization
Machine Edition load and execute
166
The splash screen reports actions and status conditions that occur during startup.
This includes firmware and hardware revision information.
Figure 26 - Start-up Splash Screen
State Message
Logic Module
Hardware Revision
Boot Loader
Firmware Revision
BL 02.12 01 OSEX
OS 02.14 APP
Operating System
Firmware Revision
Machine Edition
Firmware Revision
OS Extensions
Firmware Revision
This table lists messages associated with each state and the corresponding status
or error codes.
State Message
AutoTest
AutoTest
AutoTest
Boot
Init
Init
Init
Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Status or
Error Code
© 2013 Rockwell Automation, Inc.
All Rights Reserved.
INIT N3
01.03 APPEX 02.10 COMM 05.51
06.10 SERV 02.51 FONT 01.01
FactoryTalk Services
Firmware Revision
FactoryTalk ViewPoint
Firmware Revision
Code Recommended Action
OA Messages during this phase of startup are for information
purposes only.
E6
FF
G0
H1 - JA
K1 - MA
ME
Progress Bar
RSLinx Enterprise
Firmware Revision
Font Collection
Firmware Revision