Mounting Clearances; Panel Guidelines; Panel Cutout Dimensions; Chapter 2 Install Terminal Mounting Clearances - Allen-Bradley PanelView Plus 6 User Manual

Chapter 2 Install Terminal

Mounting Clearances

Panel Guidelines

Panel Cutout Dimensions

30
Plan for adequate space around the terminal, inside the enclosure, for ventilation
and connections. Consider heat produced by other devices in the enclosure. The
ambient temperature around the terminal must be 0...55 °C (32...131 °F).
Table 31 - Minimum Required Clearances
Product Area Minimum Clearance
Top 51 mm (2 in.)
Bottom 102 mm (4 in.)
Side 25 mm (1 in.)
Back 0 mm (0 in.)
A clearance of 102 mm (4 in.) is sufficient on the side of the terminal to insert
and remove an SD card, and on the bottom of terminal for connections.
The terminals are panel-mounted devices intended to mount in the door or wall
of a NEMA rated, UL Type rated, or IP rated enclosure:
• Supporting panels must have a mounting thickness of 1.5...4.8 mm
(0.060...0.188 in.).
• The material strength and stiffness of the panel must be sufficient to hold
the terminal and maintain an appropriate seal against water and dust.
• The panel surface must be flat and free of imperfections to maintain an
adequate seal and NEMA and UL Type ratings.
Use the full size template shipped with your terminal to mark the panel cutout
dimensions.
Table 32 - Panel Cutout Dimensions
Terminal Input Type
400 Keypad or keypad/touch
Keypad or keypad/touch
600
Touch
Keypad or keypad/touch
700
Touch
Keypad or keypad/touch
1000
Touch
Keypad or keypad/touch
1250
(1)
Touch
Keypad or keypad/touch
1500
Touch
(1)
Also applies to high-bright display module, cat. no. 2711P-RDT12H.
Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Height, mm (in.) Width, mm (in.)
123 (4.86) 156 (6.15)
142 (5.61) 241 (9.50)
123 (4.86) 156 (6.15)
167 (6.57) 264 (10.39)
154 (6.08) 220 (8.67)
224 (8.8) 375 (14.75)
224 (8.8) 305 (12.00)
257 (10.11) 390 (15.35)
257 (10.11) 338 (13.29)
305 (12.00) 419 (16.50)
305 (12.00) 391 (15.40)