Required Tools - Allen-Bradley PanelView Plus 6 User Manual

Required Tools

Install and Replace Components
Topic
Install or Replace the Logic Module
Install or Replace a Communication Module
Replace the Display Module
Replace the Bezel
Replace the Backlight
Replace the Battery
Install the AC Power Supply Module
Remove the Product ID Label
Replace the Keypad Legend Inserts
Load an SD Card
Clean the Display
ATTENTION: Prevent Electrostatic Discharge
This equipment is sensitive to electrostatic discharge, which can cause internal
damage and affect normal operation.
Follow these guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in use.
ATTENTION: Shock Hazard
Disconnect power from the terminal before installing or replacing any
components. Failure to disconnect power can result in electrical shock or damage
to the terminal.
You need a #1 and #2 Phillips screwdriver to replace some of the components.
Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Chapter
Page
120
121
123
124
126
130
132
134
134
136
137
5
119