Configuration Mode; Access Configuration Mode - Allen-Bradley PanelView Plus 6 User Manual

Topic

Access Configuration Mode

Terminal Settings
Load and Run Application
Start-up Options
Desktop Access
Communication Setup
Ethernet Network Connections
File Management
Display Settings
Input Device Settings
Access Configuration Mode

Configuration Mode

Page
45
48
50
51
54
58
60
64
67
69
The terminal uses built-in software, FactoryTalk View ME Station, to configure
start-up options, load and run applications, access the Windows desktop, and
perform other terminal operations. When you reset the terminal, one of these
actions occurs, depending on the configured start-up option:
• FactoryTalk View ME Station Configuration mode is launched (closed
system). This is the initial default.
• FactoryTalk View Machine Edition HMI .mer application is set to run
(closed system).
• Windows Explorer desktop is launched (open system).
You can access the Configuration mode of the terminal from the Windows
Explorer desktop by double-clicking the FactoryTalk View ME Station icon.
• To access Configuration mode from a running application, press Goto
IMPORTANT
Configuration Mode. This button is added to application screens in
FactoryTalk View Studio software during application development. The
application stops running but is still loaded.
• Refer to
access Configuration mode if the application does not contain a Goto
Configuration Mode button.
Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017
Topic
Configure Print Options
Check Integrity of Application Files
Configure Diagnostics
View and Clear the System Event Log
System Information
Enable or Disable the Alarm Display
Time and Date Settings
Regional Settings
Font Linking
Configuration Mode Access on page 170
3
Chapter
Page
72
74
75
76
76
78
79
81
84
for details on how to
45