Accessories; Pneumatic System; Extraction - Dräger Babytherm 8000 Repair Instructions

1.5.6 Repair information and modification statuses
1.5.6.1 Mounting the mechanics of the resting-surface
tilt-mechanism
With immediate effect, the mechanics of the resting-surface tilt-mechanism must
be mounted with 4 Spax screws (order no. 12 75 593). Devices already in service
must be retrofitted with this type of screws, see IDM no. 1 and conversion
instructions under "U", Chapter 2.1. The two cylinder head screws of the latch
2M 20 855 and the screw on the control lever must be secured with epoxy
hardening glue (UHU-Plus, order no. 11 95 255).
1.6

Accessories

1.6.1 Cabinet
- Cabinet mount, complete
- Swivel cabinet
1.6.2 Rail for resting-surface
- Modification kit rail
2.

Pneumatic system

2.1

Extraction

The extraction is not part of this documentation.
6132.200 Babytherm 8000
•
Mains failure alarm
•
Data storage with mains failure alarm
•
Function of keys
•
Function of display elements
•
No error messages
Repair Instructions
(9.94)
2M 20 868
2M 20 638
2M 21 468
04.01 Page 14 of 115