YASKAWA SI-P3 Installation Manual page 26

5 Installation Procedure
4.
Insert the option card (B) into the CN5-A connector (H) on the drive and fasten it into
place using the included screws (C). Tighten both screws to 0.5 to 0.6 Nm (4.4 to
5.3 in. lbs).
Note: Installing the option card on a GA700 drive requires only two screws and does not require a
ground wire. The option package ships with three screws and a ground wire for installation on
other drive series. Do not use the ground wire or the extra screw.
Figure 14
H
26
Figure 14 Insert the Option Card
YASKAWA ELECTRIC TOBP C730600 82B YASKAWA AC Drive Option SI-P3 Installation Manual
A1000
B
C