Product Overview - YASKAWA SI-P3 Installation Manual

2 Product Overview

2 Product Overview
u
About This Product
The SI-P3 PROFIBUS-DP Option is an open digital communication system supporting a
wide range of fast, time-critical applications.
PROFIBUS Decentralized Periphery (PROFIBUS-DP) is one of the three PROFIBUS
variants. DP is dedicated to fast data communication between systems and peripherals at a
field level. This option connects a Yaskawa drive to a field network using the
PROFIBUS-DP protocol.
PROFIBUS-DP is included into the European Fieldbus Standard EN 50170.
The network is primarily used in process and factory automation.
Install the option/PROFIBUS option on a drive to perform the following functions from a
PROFIBUS-DP master device:
• Operate the drive
• Monitor the drive operation status
• Change drive parameter settings
u
Applicable Models
The option can be used with the models in
Drive Series
Note: Refer to the option package labeling in the field designated "PRG" (four digit number)" or the
option labeling in the field designated "C/N" (S + four digit number)" to identify the option
software version.
8
Table 1 Applicable Models
A1000
U1000
Z1000U
GA700
YASKAWA ELECTRIC TOBP C730600 82B YASKAWA AC Drive Option SI-P3 Installation Manual
Table 1.
Model Number
All models
All models
All models
All models