YASKAWA SI-P3 Installation Manual page 18

5 Installation Procedure
2.
Affix the LED label (E) in the appropriate position on the drive front cover (C).
Figure 5
3.
Insert the option card (B) into the CN5-A (K) connector on the drive and fasten it into
place using one of the included screws (H). Tighten the screw to 0.5 to 0.6 Nm (4.4
to 5.3 in. lbs).
Figure 6
K
18
Figure 5 Affix the LED Label
Figure 6 Insert the Option Card
YASKAWA ELECTRIC TOBP C730600 82B YASKAWA AC Drive Option SI-P3 Installation Manual
C
ERR RUN
BF COMM
B
H
E