YASKAWA SI-P3 Installation Manual page 28

5 Installation Procedure
8.
Replace and secure the LED Status Ring board (G).
Use the open space provided inside the LED Status Ring board to route option
wiring.
NOTICE: Do not pinch cables between the front cover or the LED Status Ring board and the drive. Failure
to comply could cause erroneous operation.
9.
Replace and secure the front cover of the drive (D) including the keypad (F).
Figure 17
28
G
Figure 17 Replace the Front Cover and Keypad
YASKAWA ELECTRIC TOBP C730600 82B YASKAWA AC Drive Option SI-P3 Installation Manual
A1000
Install the keypad to the drive after replacing
the keypad connector and then the keypad
connector. At that time, insert the keypad
connector tab into the drive.
Tab
Keypad
connector
D
F