Stator Differential; Sources - GE G60 Instruction Manual

METERING

6.4.2 Stator differential

ACTUAL VALUES  METERING  STATOR DIFFERENTIAL  STATOR DIFFERENTIAL
 STATOR
 DIFFERENTIAL
The phasors of differential and restraint currents are displayed in primary amperes.

6.4.3 Sources

6.4.3.1 Menu
ACTUAL VALUES  METERING  SOURCE SRC 1
 SOURCE SRC 1

6
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power
values are unavailable.
6-16
STATOR DIFF OPERATE

Iad: 0.00 A
STATOR DIFF RESTRAIN

Iar: 0.00 A
STATOR DIFF OPERATE

Ibd: 0.00 A
STATOR DIFF RESTRAIN

Iar: 0.00 A
STATOR DIFF OPERATE

Icd: 0.00 A
STATOR DIFF RESTRAIN

Icr: 0.00 A
 PHASE CURRENT

 SRC 1
 GROUND CURRENT

 SRC 1
 PHASE VOLTAGE

 SRC 1
 AUXILIARY VOLTAGE

 SRC 1
 POWER

 SRC 1
 ENERGY

 SRC 1
 DEMAND

 SRC 1
 FREQUENCY

 SRC 1
 CURRENT HARMONICS

 SRC 1
 VOLTAGE HARMONICS

 SRC 1
CHAPTER 6: ACTUAL VALUES
See below
See page 6-17
See page 6-17
See page 6-18
See page 6-18
See page 6-19
See page 6-20
See page 6-21
See page 6-21
See page 6-21
G60 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL