Virtual Inputs; Clear Records - GE G60 Instruction Manual

COMMANDS MENU

7.1.1 Virtual inputs

COMMANDS  VIRTUAL INPUTS
 COMMANDS
 VIRTUAL INPUTS
The states of up to 64 virtual inputs are changed here. The first line of the display indicates the ID of the virtual input. The
second line indicates the current or selected status of the virtual input. This status is a state off (logic 0) or on (logic 1).

7.1.2 Clear records

COMMANDS  CLEAR RECORDS
 COMMANDS
 CLEAR RECORDS
7
This menu contains commands for clearing historical data such as the event records. Data is cleared by changing a
command setting to "Yes" and pressing the
"No."
7-2
Virt Ip 1

Off
Virt Ip 2

Off

Virt Ip 64

Off
CLEAR USER FAULT

REPORTS? No
CLEAR EVENT RECORDS?

No
CLEAR OSCILLOGRAPHY?

No
CLEAR DATA LOGGER?

No
CLEAR DEMAND

RECORDS? No
CLEAR ENERGY?

No
CLEAR UNAUTHORIZED

ACCESS? No
CLEAR DIRECT I/O

COUNTERS? No
CLEAR TELEPROTECT

COUNTERS? No
CLEAR FREQ OOB

ACCUMULATORS? No
PRESET FREQ OOB

ACCUMULATORS? No
 CLEAR IEC61850

 XWSI OPCNT
 CLEAR IEC61850

 XCBR OPCNT
CLEAR ALL RELAY

RECORDS? No
key. After clearing data, the command setting automatically reverts to
ENTER
CHAPTER 7: COMMANDS AND TARGETS
Range: Off, On
Range: Off, On
Range: Off, On
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes.
Valid only for units with Direct Input/Output module.
Range: No, Yes
Range: No, Yes
Range: No, Yes
See below
See below
Range: No, Yes
G60 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL