Enable Video Transmit - Cisco 8941 User Manual

Video settings
Always send my video (Default)
Enables or disables automatic sending of video for the phone.
If you select Always send my video for your phone, initiated calls connect as video calls when the
following conditions are met:
If you select Always send my video, the video quality is the maximum the phone supports.
Brightness
Adjusts video brightness.
When you place a video call, the video displays only if both parties have phones that support the video
Note
feature. If you receive the message Not a video enabled device when you place the call, the
called phone does not support video.

Enable video transmit

If your system administrator enables video on the Cisco Unified Communications Manager, you can enable
your phone to send video.
You can stop transmitting video for the call by disabling video transmit.
Note
If you disabled video transmission at any time during the call, you can re-enable video for the call by
pressing the Video Mute button. When video transmission resumes, the phone displays the video user
interface, and the Video Mute button is unlit.
Procedure
Step 1
Press Applications
Step 2
Use the Navigation pad and Select button to scroll and select Preferences.
Step 3 Select Video.
Step 4 Select Video calls.
Step 5 Select On to enable video calls or Off to disable video calls.
Step 6
Press
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
20
• both phones on the call have video calls enabled
• your administrator enabled Video Support for phones on the call
• both phones on the call include a video camera
.
to return to the previous screen.
Phone Applications