Chapter 10: Installing The Obd Module - Nexcom VMC 1100 User Manual

Chapter 10: Installing the OBD Module

C 10: I
haPter nstallIng the
1. Remove the heatsink.
2. Remove the hole cover.
Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved
obd m
odule
3. Put the OBD module into the bracket and secure it with screws.
4. Place the adapter board onto the OBD module, please note, the pins on
the adapter board have to be inserted into the OBD module. Once fully
inserted, secure the OBD module with screws.
61
VMC 1100 User Manual