Nexcom VMC 1100 User Manual page 50

Chapter 5: Touchscreen Driver Installation
Plot Check this function to have touch panel linearity
Calibration comparison graph appear when you finish Advanced
Data Calibration. The black lines reflect the ideal linearity
assumed by PenMount's application program while the
blue lines show the approximate linearity calculated by
PenMount's application program as the result of user's
execution of Advance Calibration.
Turn off This function disables the write-in of calibration data in
EEPROM Controller. This function is enabled by default.
storage
Setting
Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved
Operation This mode enables and disables mouse's ability of
Mode dragging on-screen icons—useful for configuring POS
terminals.
Pen Input
Emulation
Mouse
Emulation
Click on
Touch
Click on
Release
Beep Sound Enable Beep Sound turns beep function on and
Beep on Pen Down
Beep on Pen Up
Beep on both
Beep Frequency
Beep Duration
36
Select this mode and mouse
will emulate Windows Vista
pen input device operation,
by which no mouse event
will be sent until the touch
is dragged out of range or
released from the screen.
Select this mode and mouse
functions as normal and
allows dragging of icons.
Select this mode and mouse
only provides a click function,
and dragging is disabled.
Select this mode and mouse
only provides a click function
when the touch is released.
off.
beep occurs when pen comes
down.
beep occurs when pen is lifted
up.
beep occurs when comes
down and is lifted up.
modifies sound frequency.
modifies sound duration.
VMC 1100 User Manual