Chapter 8: How To Install The Wwan Or Wi-Fi Module - Nexcom VMC 1100 User Manual

Chapter 8: How to Install the WWAN or Wi-Fi Module

C 8: h
haPter ow to
1. Remove the screws on the heatsink to remove it.
Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved
I wwan
nstall the
57
w -f
or I
2. The Mini PCI express slot shown below is used to install a WWAN or Wi-Fi
communication module.
3. Insert the module into the Mini PCI Express slot at a 45 degrees angle
until the gold-plated connector on the edge of the module completely
disappears inside the slot. And then attach the RF cable to the module.
4. Install the rear cover.
m
I odule
For WWAN
module
For Wi-Fi
module
VMC 1100 User Manual