Installing Penmount Digitizer Driver In Windows Xp/Vista/7/Wes7/2008/8; Configuring Touchscreen In Penmount Mouse Driver - Nexcom VMC 1100 User Manual

Vehicle mount computer

Hide thumbs Also See for VMC 1100:

Table of Contents

Chapter 5: Touchscreen Driver Installation

Installing PenMount Digitizer Driver in Windows XP/

Vista/7/WES7/2008/8

The installation steps of the default settings are consistent with XP. When

you select "no" for step 6, PenMount will be installed as a digitizer device;

If your operating system doesn't support Windows tablet input, digitizer

device can't be used, therefore you have to select "yes" here, otherwise

after the installation the touch doesn't work after re-booting.

After the installation, you will see the difference that a PenMount Control

Panel icon shows up on the desktop without a

area. See the screenshot below:

Click on the PenMount Monitor icon

Control Panel from the menu.

icon in the notification

On PenMount Control Panel you are able to see the device of PenMount

6000 USB/RS-232 detected by your system under Device tab. Select a

device and click the Configure button.

in the notification area and select

VMC 1100 User Manual

Table of Contents