ProCurve 9304m Diagnostics Manual page 71

Table 3.6: Output from the show ip bgp debug command (Continued)
Statistic
Maximum Number of Peers Supported
BGP Route Table Full Count
Bad Memory Pool ID Count
Bad Memory Address Count
debug ip bgp errors
debug ip bgp event
debug ip bgp state
Syntax: show ip bgp debug
Possible values: N/A
Default value: N/A
show debug
Lists the debugging options currently in effect on the device.
June 2005
Description
Number of BGP4 peers the router can have.
How many times a route could not be added to the BGP route
table because the route table was full.
Number of times a memory pool was reported as bad. If
there is a non-zero value in this field, contact HP technical
support.
Number of times a memory address was reported as bad. If
there is a non-zero value in this field, contact HP technical
support.
The debug ip bgp options that are currently in effect.
HP Diagnostic Command Reference
3 - 57